Does composite decking need maintenance?
It's true that many composite decking options require very little maintenance but they do need basic cleaning in order to keep them looking presentable No, you don't need to repaint or reseal composite decking, and it is very resistant to rot, however, it's a good idea to sweep them clean weekly in order to prevent the growth of mold and lichen.
Is composite decking slippery when wet?
Composite decks are not slippery even when there is water on the surface. The problem, however, is when there is an accumulation of both ice and water on your composite decking. Aside from being the cause of accidents, ice, and the removal of it, can cause some damage to your patio. Non-anti slippery composite decking.
Is composite wood waterproof?
Composite decking does not absorb water. When moisture gets trapped under the decking and on top of the wood joists, it stays there and keeps it from drying properly. Homeowners who are looking for waterproof composite decking materials should look for those that have special features.
Why is composite wood so expensive?
Most composite decks are manufactured from the by-products of wood such as wood chips, sawdust, and recycled plastic materials.
This unique combination makes composite decks expensive than other types of decking material.
How much does composite wood cost?
Averaging between $3.50 and $6.00 per linear foot, the cost of installing a high-quality composite deck will certainly be higher than building with traditional pressure treated lumber, which can cost between $5.00 - $7.00 per (8') board.
What are the disadvantages of composite decking?
A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood.
Composites aren't natural.
Composite decks aren't completely maintenance free.
You'll need to comparison shop.
Cons of Composite Decking
What are the problems with composite decking?
One of the most common complaints about composite decking is mold. Decking that is in shaded area or areas that tend to get wet frequently have been shown to grow mold and stain the deck. This is not restricted to composite decking. Wood decking can grow mold, mildew and algae.
How long do Composite decks last?
Composite decking can last over 20 years with the proper care and maintenance. Composite holds up better under hot or cold weather shifts. Composite is resistant to rot, mold, and termites, which can take their toll on wood decking materials. Composite does not require as much upkeep as wood.
20 years
  • Why is composite wood so expensive?
  • How much does composite wood cost?
  • What are the disadvantages of composite decking? Cons of Composite Decking
  • What are the problems with composite decking?
  • How long do Composite decks last? 20 years
Installing a deck is one of the best improvement projects you can undertake. You can […]

Installing a deck is one of the best improvement projects you can undertake. You can […]

Installing a deck is one of the best improvement projects you can undertake. You can install decks almost anywhere, as long as there is a suitable foundation. While they are easiest to install on level grounds, you can also build them on sloped or uneven terrain. With that said, you may need to take a few extra steps in ensuring the stability and quality of your composite decking. How do I lay decking on uneven ground?

How to Build Decks on Uneven Ground

There are several ways to install a deck on a sloping foundation. The best approach may depend on many factors, such as the degree of elevation of the ground, the materials you will be using, and the decking type you want to build. Here are some of the methods that you can use.

Using Concrete Support Posts

Support posts are excellent for all types of decks but work best for decking attached to the houses. It’s best suited for areas where the direction of the slope is away from the building. Here are the steps on how to build it. 

Step 1: First, you will need to clear the installation area. Remove any weeds, grass, and other vegetation in the ground. You’ll also want to compact and flatten the installation area with a tamper. 

Step 2: Next, start digging for the post holes. The depth of the hole should be at least one foot below solid ground. However, for elevated decks on steeper slopes, you may need to consider other building regulations for the appropriate measure. 

Step 3: You have a few options to choose from for the next step. There are several kinds of support posts systems. One option is to pour concrete directly into the hole and let it cure according to instruction. After it dries, attach concrete fasteners to the concrete using a concrete drill. Lastly, install the wooden posts into the concrete fasteners. This method is the preferred choice, especially for steeper slopes. 

Another option is placing the post inside the hole. For this, you will need to layer the base of the hole with gravel. Then, place the 6×6 or 2×6 wood post into the hole and ensure that it’s level. Lastly, pour the concrete mix to hold the wood post in place. You will also need to create temporary braces on the posts. This option works best for gentler slopes. 

Step 4: Since wood posts will have different heights, you will want to run and level a string line across the wood posts to determine where to attach the other subframe parts. Once marked, you can start installing the beams and the joists. Check with your local building standards for the right screws and wood thickness you should use. 

Step 5: Once you finish setting the subframe, you can now install the decking boards. You may also need to install railings for safety and to comply with local building standards. 

Using Concrete Slabs

laying decking on uneven ground

Another approach for uneven grounds is by using concrete slabs. This solution only works on generally level ground with light sloping. It’s also best for low-level floating decks. Here are the steps you can follow.

Step 1: Mark the installation area and dig at least 20cm deep, removing any grass or weed in the process. Then, compact and tamper the whole excavation area. 

Step 2: Next, cover the dig site landscaping fabric, which helps prevent unwanted weed growth. It also provides water drainage. Then, layer the area with MOT Type 1 sub base. Alternatively, you can also use a mixture of fine and coarse gravel, which is often easier to find. Fill the area at least 50cm deep. 

Step 3: Place the concrete slabs in the installation area. Then, place pieces of wood on the slabs to make sure they are level. If not, you can add more gravel or base and readjust the concrete slabs. 

Step 4: Start building the subframe of the deck, composing beams and joists. Then, place the frame over the concrete slabs. Again, check the subframe if it’s level. Make changes when necessary. 

Step 5: After setting the frame, you can now lay the decking boards. 

Since the decking boards are relatively close to the ground, you may want to choose high-resistant materials. For softwoods, go with Cedar and Redwood. Most hardwoods are excellent for ground-level decks. You can also use non-wood alternatives, such as composite decking materials. 

Read full article on Ultra decking

Not All Synthetic Decking Is "Composite".
Not All Building Codes Allow Composite Decking.
Composite Lumber Is Not Just Decking.
Composite Lumber Can Be Expensive.
Higher-Quality Products Look More Like Wood.
Composites Can Be Slippery When Wet.