Does composite decking need maintenance?
It's true that many composite decking options require very little maintenance but they do need basic cleaning in order to keep them looking presentable No, you don't need to repaint or reseal composite decking, and it is very resistant to rot, however, it's a good idea to sweep them clean weekly in order to prevent the growth of mold and lichen.
Is composite decking slippery when wet?
Composite decks are not slippery even when there is water on the surface. The problem, however, is when there is an accumulation of both ice and water on your composite decking. Aside from being the cause of accidents, ice, and the removal of it, can cause some damage to your patio. Non-anti slippery composite decking.
Is composite wood waterproof?
Composite decking does not absorb water. When moisture gets trapped under the decking and on top of the wood joists, it stays there and keeps it from drying properly. Homeowners who are looking for waterproof composite decking materials should look for those that have special features.
Why is composite wood so expensive?
Most composite decks are manufactured from the by-products of wood such as wood chips, sawdust, and recycled plastic materials.
This unique combination makes composite decks expensive than other types of decking material.
How much does composite wood cost?
Averaging between $3.50 and $6.00 per linear foot, the cost of installing a high-quality composite deck will certainly be higher than building with traditional pressure treated lumber, which can cost between $5.00 - $7.00 per (8') board.
What are the disadvantages of composite decking?
A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood.
Composites aren't natural.
Composite decks aren't completely maintenance free.
You'll need to comparison shop.
Cons of Composite Decking
What are the problems with composite decking?
One of the most common complaints about composite decking is mold. Decking that is in shaded area or areas that tend to get wet frequently have been shown to grow mold and stain the deck. This is not restricted to composite decking. Wood decking can grow mold, mildew and algae.
How long do Composite decks last?
Composite decking can last over 20 years with the proper care and maintenance. Composite holds up better under hot or cold weather shifts. Composite is resistant to rot, mold, and termites, which can take their toll on wood decking materials. Composite does not require as much upkeep as wood.
20 years
  • Why is composite wood so expensive?
  • How much does composite wood cost?
  • What are the disadvantages of composite decking? Cons of Composite Decking
  • What are the problems with composite decking?
  • How long do Composite decks last? 20 years
Many homeowners are looking into different ways to save money while doing construction projects. And […]

Many homeowners are looking into different ways to save money while doing construction projects. And […]

Many homeowners are looking into different ways to save money while doing construction projects. And that includes installing composite decking. With so many guides on the internet on how to do it, one can accomplish it without any professional help. But one of the many concerns when building a deck is the preparation of the materials, especially the decking boards. So, what is the best way to cut composite decking boards? 

What Type of Saw Do You Need?

When cutting composite decking boards, you will need some tools to do it. What are some saws that you can use? Like cutting wood, you can use different types of saws depending on the cut you want. What are some examples?

Like wood, you can use a conventional hand saw to cut composites. But it’s not efficient and will take a lot of time. You also need to make sure that it’s sharp. So if you are a beginner when it comes to building, now may be the best time to start investing better tools. 

A better option for cutting composites is by using a circular saw. It’s a handheld saw capable of cutting wood, plastics, and composites smoothly. However, it does take a certain amount of skill and experience to handle it by itself. The material you’ll be cutting should be held down by clamps to avoid any accidents. As far as cutting goes, it’s usable, but not the best, especially for more precise cuts. 

Aside from handheld circular saws, you can also use table saws. Table saws consist of a circular blade fitted under a workbench. Wood, plastic, and composite decking boards are then pushed towards the protruding saw blade, making clean and controlled cuts. It’s the most versatile among all types of saws that you can use for cutting composite decking.

Lastly, there’s the mitre saw. It consists of an adjustable saw blade that can cut precise angle cuts. It’s the best type of saw to use to make cross-cuts. Furthermore, it also has the most cutting accuracy among all mentioned saw types. However, you won’t be able to use this type of saw if you plan on ripping wood or composites. 

Best Way to Cut Composite Decking

decking construction

So the question is, what is the best way to cut composite decking? It depends on what type of cut you are aiming for your deck. For instance, if you want fast and efficient cuts for multiple boards, a table saw would be perfect for the job. Many also use this tool to cut decking boards, both wood and composites, along the grains. 

Of course, when installing decks, you may also have to do more precise and angled cuts. For this purpose, you can use a table saw, or a circular saw to an extent. However, if you want the best way to cut the boards, you’ll want to use a mitre saw. 

Another concern is what type of blade to use. But for this, you may want to look into your boards’ manufacturers. They can give you specific instructions regarding what type of saw blades to use. But in general, blades with more teeth count produce smoother cuts, while fewer mean faster sawing. For general purposes, a medium-duty blade with medium to high tooth count works well. 

In general, similar to wood, you can cut composite decking pretty much how you want it. As long as you have the proper tools and know what you’ll be doing, you can create excellent decking board cuts. 

How to Cut Decking Boards?

Cutting composites is similar to cutting wood. First, you will need to mark the composites where you like to cut it. Next, depending on the type of cut you want, use the appropriate saw. Make sure to observe safety at all times. For the deck edge, you may want to leave a few inches of allowance. If you do this, you can mark and cut the edge of the entire deck for a smoother and easier cut. 

Read full article on Ultra decking

Not All Synthetic Decking Is "Composite".
Not All Building Codes Allow Composite Decking.
Composite Lumber Is Not Just Decking.
Composite Lumber Can Be Expensive.
Higher-Quality Products Look More Like Wood.
Composites Can Be Slippery When Wet.